Scan Paper DIRECT into Cloud based Storage.
TWAIN Drivers: Scan Software you will be receiving supports only scanner or multi-function devices or printers (MFD or MFP) with TWAIN drivers. This includes most scanners manufactured in the last few years and recent MFDs or MFPs. Refer to the specification section of your scanner product data sheet or user guide to verify that the scanner uses a TWAIN driver. TWAIN drivers are usually delivered with new scanners and may be installed if you run scanner setup from the CD-ROM. Note that some low-end, very inexpensive scanners do not support TWAIN drivers. Please verify before purchasing.
Storage: This scanning software you will be receiving can be installed on a stand-alone computer, a workgroup computer or a Windows Domain computer. Storage locations may be local, network shares, NAS, USB/Firewire drives or removable media. Storage capacity depends on the number and size of documents stored. Scan Software consumes about 15 MB on the installation drive. If delayed indexing is used, documents are cached temporarily on the local computer or a network share created for that purpose. In this instance, the computer maintaining the cache will require additional disk storage equal to or slightly more than the size of the temporary images.
Networks: In all cases importing or scanning documents to a repository or folder on a network or the Internet is highly dependent on the network effective bandwidth. A dial-up network will not support continuous scanning and storing of documents even from the slowest scanners. Modern intranets and Internet connections via DSL, Cable, T1 and T3 lines can easily support continuous scanning and storing of documents at the workgroup level. When scanning and storing many documents at a time over the Internet consider using ccScan's deferred indexing (Index Later) for indexing and document naming. Then scanning can proceed at flank speed as will document naming, indexing and export to the storage